Description
The Water Pressure Testing Chamber – 10 MPa / 20 L is a professional-grade hydrostatic testing apparatus constructed from corrosion-resistant 316 stainless steel. It allows engineers and technicians to safely simulate water pressures up to 10 MPa—equivalent to a depth of 1,000 meters—making it ideal for validating the pressure integrity of underwater equipment including enclosures, cable penetrators, and connectors.
The chamber includes a manual hydraulic pump, a high-capacity 20 L stainless steel pressure vessel, and a precision-machined hatch cover with 18 penetrator-compatible openings. These ports enable real-time electrical or data connections to devices under test. The hatch cover also features high-strength handles and a rotating lock mechanism with safety ratchets for secure operation during pressure cycling.
The chamber is equipped with quick couplings for easy pressure connections and supports a pressure range of 0–10 MPa with a gauge and pump capable of 0–16 MPa. It includes a steel drip tray to catch discharge and reduce mess, as well as 8 fulcrum wheels to assist with mobility on level ground. Due to its substantial weight (~200 kg), it must be lifted using appropriate mechanical assistance such as a crane.
Pressure Equipment Compliance & Documentation:
Pressure-equipment rules vary by country, state/province, and even by facility. Because we sell globally, it is not practical to pre-register or pre-certify each chamber in every jurisdiction. Instead, we design and build the chamber for safe operation at its stated working pressure with an appropriate safety margin, and we supply factory documentation to support your internal and local compliance process.
Factory documentation can include:
• Design / pressure data
• Working pressure and test pressure details
• Material specifications
• Operating instructions
• Factory test certificate for the chamber
End-user responsibilities:
• Confirm applicable pressure-equipment requirements in the region of use
• Register the vessel and/or arrange inspection if required by local regulations or site safety policy
• Follow any periodic inspection or recertification schedule specified by the applicable authority or internal safety office
This equipment is suitable for pressure testing of subsea products in R&D, QA, and prototyping workflows. It requires basic hydraulic knowledge and safe handling practices. A pressure relief penetrator tool (HOP6 hex wrench) is recommended for maintenance. Operators should also be aware of the recommended water fill level (~25 L total capacity) and must dry steel bolts after use to prevent corrosion.
Important: This device is intended for professional use only. Pressure should never exceed the rated 10 MPa. Any visible deformation, unusual force required during operation, or fluid leakage indicates the need to stop immediately. Operators are responsible for understanding hydraulic safety protocols and for preventing water damage to surrounding environments or damage to test items due to overpressurization.
SHIPPING LIST
Technical Specifications
| Chamber Internal Height | 455 |
| Chamber Inner Diameter | 250 |
| Chamber Material | 316 Stainless Steel |
| Hatch Cover Material | 316 Stainless Steel |
| Openings in Hatch Cover | 18 Openings |
| Rated Load of Hatch Handle | 200 kgf / 1960 N per handle |
| Medium | Pure Water |
| Rated Pressure | 10 MPa (1,000 meters depth) |
| Drip Tray Dimensions | 800 × 600 |
| Pressure Range of Manual Hydraulic Pump | 0–16 MPa |
| Pressure Gauge Range | 0–16 MPa |
| Pressure Connection Method | Quick Coupling |
| Operating Temperature | 0–50 ℃ |
| Chamber Total Weight | ≈200 kg |
| Fulcrum Wheels | 8 pcs |
Disclaimer:
This equipment is intended for professional use. Operators must have a fundamental understanding of hydraulic safety principles and must operate, handle, and maintain the chamber in accordance with the provided operating instructions and applicable local safety requirements. Safe operation, including appropriate risk controls and supervision, remains the responsibility of the end user.
Examples of situations that can result in damage, injury, or property loss include (but are not limited to):
1. Damage caused by misuse, improper setup, unauthorized modification, disassembly, or failure to follow the operating instructions.
2. Injury or damage caused by improper lifting, moving, or securing of the chamber due to its weight.
3. Damage caused by inadequate support or load-bearing capacity of the installation surface or handling equipment.
4. Injury caused by high-pressure fluid release, pressurized components, or improper connections.
5. Water leakage or spillage during filling, venting, pressurization, or depressurization causing damage to surrounding areas.
6. Damage to the test item caused by exceeding its rated pressure tolerance or improper test procedure.
Operations Guide – Water Pressure Testing Chamber
This pressure testing apparatus’s consumables include: hatch cover sealing rings, water, lubricating grease, plugs, and other components.
There is a designated safety pressure range, and the pressure should not be sustained above 10 MPa. Any convex deformation of the hatch cover under pressure necessitates an immediate cessation of operations.
The chamber is quite heavy, so do not attempt manual lifting. A crane should be used for lifting.
The handles are designed with high load-bearing capacity. After securing the hatch cover in place and installing the safety ratchet, lifting can be initiated.
When the chamber does not need to be moved, position the fulcrum wheels at the step load-bearing positions.
It is essential to have a basic understanding of hydraulic safety before proceeding with any operations.
What tool is used to remove the pressure relief penetrator?
Use a HOP6, which is a double-ended 6 mm hex wrench. (refer to images below)
How to move?
When moving on flat ground, adjust the fulcrum wheels and push directly. If it cannot be moved by pushing, use a crane to lift it by the handles as shown in the picture below. (refer to images below)
Can the drip tray catch all the water from the chamber?
Yes, it can, but avoid submerging the chamber in external water to prevent rusting of the bottom screws.
When the chamber is filled with water, to what level and how many liters of capacity does it reach?
Around 25 L, when the water level is about 20 mm from the top edge. (refer to images below)
If the pressure slightly decreases on the pressure gauge after maintaining pressure for a while, does it mean that water has entered the product?
Not necessarily. In hydraulic systems, pressure naturally decreases over time. For extended holding, close the shutoff valve, and reopen it later to read the pressure. Always open the shutoff valve before releasing pressure via the pressure release valve.
Why do the screws on the chassis rust over time?
The chamber uses high-strength carbon steel bolts (12.9 grade) to withstand pressure, which are prone to rust. Always dry them promptly after exposure to water.
Is operating the manual pressure pump labor-intensive?
It can feel labor-intensive at low pressure. Make sure the shutoff valve is fully open. More effort is required near 10 MPa.
Why can't the manual pressure pump generate pressure?
Check the following:
• All hatch cover penetrators are installed and sealed with O-rings.
• The pressure relief penetrator is in place.
• No visible leaks from hatch penetrators.
• The pressure release valve is closed.
• There’s sufficient fluid in the reservoir.
