DESCRIPTION
Deep-Sea Cable Connectors – M10 Bulkheads are pre-assembled, panel-mount connectors featuring potted internal wiring and sealed housings for long-term underwater deployment. Available in 3-pin and 6-pin variants, they come pre-wired with UL1332 conductors (16 AWG or 16 AWG + 24 AWG) and marine-grade epoxy sealing for direct installation with no internal assembly required.
The hard-anodized aluminum body includes integrated o-rings, a threaded mounting shaft, and locking hardware for secure bulkhead installation. Wiring follows a standardized color code to match compatible male connectors, and the sealing system is designed to maintain waterproofing when mated or capped.
These bulkheads are specifically designed to mate with Deep-Sea Cable Connectors – Female Sockets & Male Plugs and are sealed when not in use using Deep-Sea Cable Connectors – Dummy Sealing Caps.
Compatible With: Deep-Sea Cable Connectors – Female Sockets & Male Plugs
Sold Separately
Blu-Sub M10 Bulkheads are designed to mate with Deep-Sea Cable Connectors – Male Plugs. To ensure proper function, the male plug must have the same number of pins as the bulkhead. This pairing forms a sealed, robust connection point for routing signals or power between internal and external systems, commonly used in subsea enclosures and panel-mounted assemblies.
Compatible With: Deep-Sea Cable Connectors – Dummy Sealing Caps
Sold Separately
Deep-Sea Dummy Sealing Caps are designed to thread directly onto M10 Bulkheads when a connection is not needed. Available in male and female versions, they maintain watertight integrity and protect the connector interface from moisture, pressure, and debris — whether in storage, transit, or active underwater deployment. Both shorting and non-shorting options are available to suit your system requirements.
Compatible With: M10-Mountable Enclosures & Components
Sold Separately
Subsea Aluminum End-Cap
Select models include pre-drilled M10 holes or blank positions that can be drilled to accept M10 bulkhead connectors.
Subsea Polymer Flange & End-Cap
Can be user-drilled to accommodate M10 connector ports for custom shallow-water builds.
Subsea Watertight Enclosure Box
Ships with 20 pre-drilled M10 ports ready for immediate installation of connectors and penetrators.
Subsea M10 Coupling Tube
Designed for in-line cable splicing and external mounting of penetrator-based devices such as signal indicators, sensors, or switches. One end features a single M10 threaded port, with the interior cavity used for sealing and strain relief.
SHIPPING LIST
TECHNICAL SPECIFICATIONS
| Item | Assembled or Not | Weight |
|---|---|---|
| 3pin M10 Female Bulkhead | Pre-assembled (wire length approx. 250mm) | 34g |
| 6pin M10 Female Bulkhead | Pre-assembled (wire length approx. 250mm) | 37g |
| SPEC | 3 PIN | 6 PIN |
|---|---|---|
| Core Rated Voltage | 500VAC | 500VAC |
| Core Rated Current | 15A(16AWG) | 15A(16AWG)+3A(24AWG) |
| Insulation Resistance | ≥10MΩ | ≥10MΩ |
| Contact Resistance | ≤10mΩ | ≤10mΩ |
| Operating Temperature | -25~70℃ | -25~70℃ |
| Maximum Wire Diameter | 16AWG | 16AWG+24AWG |
Dimension drawing provided below. It includes all parts in our Deep-Sea Cable Connectors lineup, including Deep-Sea Cable Connectors – Female Sockets & Male Plugs, Deep-Sea Cable Connectors – M10 Bulkheads, and Deep-Sea Cable Connectors – Dummy Sealing Caps.
Mounting Hole Dimensions
| Recommended Size | Underwater Connector |
|---|---|
| Recommended Bulkhead Through Hole Size (A) | Ø10.1 ± 0.1 |
| Hatch Cover Thickness (B) | 13 mm |
| Surface Range (C) | 20 mm |
Wiring Guide
What is the function of the M10 bulkhead connector?
The M10 bulkhead is the panel-mounted side of the Deep-Sea Cable Connectors system. It is installed through a sealed port on an enclosure or housing and provides the interface for connecting a matching male plug or dummy sealing cap from outside.
What are dry mate connections, and how do they apply to the bulkhead?
Dry mate means the connection must be made in air — not underwater. To ensure waterproofing, the M10 bulkhead must be fully mated with a Deep-Sea Cable Connectors – Male Plug or Male Dummy Sealing Cap before submersion.
How can I ensure long-term waterproof performance?
1. Avoid scratches or wear on the O-ring sealing surface
2. Replace aged or damaged O-rings
3. Ensure the connector is always fully mated and torqued correctly
Can I use this with a dummy sealing cap?
Yes — when not in use, the M10 bulkhead connector should be capped using a Deep-Sea Cable Connectors – Dummy Sealing Cap to maintain waterproof integrity.
3D Model Viewer
Note: The 3D model shown above is for reference purposes only. It may include components, accessories, or alternate sizes not included with the product. For simplicity, only a single representative size is typically displayed when multiple versions exist. Please refer to the product Shipping Guide for detailed information on included contents and size-specific differences.
Applicable Blu-Guide Articles
